Common Problems with Garage Door Openers in Edmonton

Below is a list of Edmonto’s most commonly encountered problems with garage door openers.

The Garage Door Wall Switch or Remote is not Working.

One of the typical issues homeowners experience in their garage door openers is a faulty wall switch or remote control. A disrupted power source might be the culprit behind this. Confirm if a disconnected opener from the breaker or fuse is going down.

Always check the plug’s connection to the outlet or examine the problem by testing other devices.
Meanwhile, if the breaker or outlet is tripped, there might be an issue with the overall system. Contact AAA Garage Door Services Edmonton for a garage door opener replacement.

The Garage Door Doesn’t Close Entirely

 If the garage door opens but does not entirely close, there might be times that it will open suddenly. Incorrect setting of the door’s limit might be the problem, or transfer the limit switch needs to be near the motor unit. A blocked photo-eye can also be why the door does not completely close, and you need to make a simple adjustment to fix the issues.

The Garage Door Doesn’t Open Entirely

Aside from a door that cannot close completely, another problem is that it can’t open entirely. One of the solutions to this problem is to move the garage door up-limit switch near the motor unit itself. However, if the opener is not the culprit, it might be damaged rollers.

Garage Door Keypad Or Remote Control Is Not Functioning

Drained remote-control batteries or poor signal between the transmitter and opener might be why the garage door keypad or remote is not functioning.

Try changing the remote control batteries and check if the garage door will work. Meanwhile, if you observe that the door works with a handheld remote and not with the keypad, the poor signal might only be the reason that is why you have to move closer to the door.

However, if none of these suggestions work, try reprogramming the remote or keypad.

Tools Needed For DIY Garage Door Opener Repair

Here are some tools and materials needed for any DIY garage door repair in Edmonton.

Tools Required

• Clamps
• Adjustable wrench
• Hammer
• Wrench set
• Winding bars
• Rags
• Cordless drill
• Leather gloves
• Socket/ratchet set
• Locking pliers
• Safety glasses

Materials Required

• Bottom brackets
• Lift cables
• Double-life torsion springs

Safety Precautions To Take Before Starting

Before starting your DIY project for garage door opener repair in Edmonton, here is the list of safety precautions.

• Evaluate the kind of garage door before buying the opener. It is very crucial to know first what kind of garage door you have before purchasing the opener for them to be compatible.
• Pick a suitable door opener. After evaluating the garage door, you have and purchasing the opener, pick the right one that will match the door.
• Gather all the parts. Gather all the parts needed and carefully read the manual’s instructions for a successful project outcome.
• Attach the bracket Attach the bracket to the wall and place the end of the assembled opener on it.

A step-by-step guide to repairing a garage door opener

You have to take necessary precautions when working with electricity. Contact AAA Garage Door Services Edmonton if you need help with any repairs or replacements. The basic things you will need for a repair are the owner’s manual and a wet cloth. Below are the steps to follow:

Step 1: See a plugged opening cord into an outlet

Step 2: The lock feature is activated. Homeowners should know that garage door opener have this feature to avoid problems.

Step 3: Try plugging in and out the opener to help reset the sensors.

Step 4: See if the handheld remote has dead batteries.

Step 5: A reprogrammed remote control might be the culprit. See the manual for reset instructions.

Step 6: Ensure a plugged beam sensor.

Step 7: Using a wet cloth, clean and wipe the sensor’s eyes with the on/off button. The signal has the tendency to be blocked when the motor is dirty.

Step 8: Check if the chain is loose or broken. Call AAA Garage Door Services Edmonton if you need some repairs or replacements with these.

Step 9: Pull the emergency release cord to free the door to open and close it manually. Call an electrician to help you if you are still getting familiar with the task.